how high or low do i mount striping kit exmark lazer z

Discussion in 'Lawn Mowing' started by milo, Apr 1, 2010.

  1. milo

    milo LawnSite Bronze Member
    Posts: 1,246

    i am putting a striping kit on my exmark lazer z 60 and wanted to know how low should it be below bottom of back of deck? any info great. thanks
     
  2. muxx

    muxx LawnSite Member
    Posts: 187

    The way I did mine, was to set my deck at the lowest height that I mow at and then put striping kit on where it stays 3/4" to 1 " off of floor. That way it never drags.
     
  3. milo

    milo LawnSite Bronze Member
    Posts: 1,246

    and do you get nice stripes set like that?
     
  4. muxx

    muxx LawnSite Member
    Posts: 187

    Sure do, I do baseball fields and they like very nice. We have won best field for 6 years running.
     
  5. milo

    milo LawnSite Bronze Member
    Posts: 1,246

    ok i mounted it on like 3/4 inch off ground for cutting at 2.5 inches. i hope it stripes good at 3 inches too cause i cut at 3 alot too
     
  6. B2Y

    B2Y LawnSite Member
    Posts: 17

    Any pics of fields?
     
  7. milo

    milo LawnSite Bronze Member
    Posts: 1,246

    i will try mine on monday if stripes good i will add pics
     

Share This Page