How to make a sealer spray unit (275g)

Discussion in 'Seal Coating Forum' started by keepoffthegrass, Dec 24, 2005.

  1. MisterRatburn

    MisterRatburn LawnSite Member
    from NY
    Posts: 23

    I agree guys! Commercial jobs require a Professional.. like some of you obviously are, but I was speaking of the common homeowner when I said that they don't know anything about Sealcoating except to just look for the cheapest price. *trucewhiteflag*
     
  2. DJ Contracting

    DJ Contracting LawnSite Senior Member
    Posts: 487


    Dude were talking 125 to 275 gals. here not 4,000 yeah that would take a very loooong time, come on be real here thats like comparing apples to oranges and yes it dumps into the top but again it's 275 gals. not 4,000 so in theory it should only take several minutes right. It's great that your doing airports, i highly doubt that you have time for small parking lots let alone driveways. Some people say that a recirculating system can't spray sand, then tell me why i have to keep replacing my tip when the pattern starts to have lines of sealer on the outside edge of the pattern after running a tank full.
     
  3. ssupercoolss

    ssupercoolss LawnSite Member
    Posts: 24

    if your tip wears out after 275 gallons, then you are using cheap tips too.
     
  4. DJ Contracting

    DJ Contracting LawnSite Senior Member
    Posts: 487

    Yeaaaa that's it :hammerhead::hammerhead::hammerhead::hammerhead: tell me more genius so you don't have an answer for the apples to oranges there Chuck, like i said your soooo good stick to the taxiways there Jack, because your putting me to :sleeping:
     
  5. MisterRatburn

    MisterRatburn LawnSite Member
    from NY
    Posts: 23

    :clapping: Lotsa drama on this board! Who knew?
     
  6. nitro121

    nitro121 LawnSite Senior Member
    Posts: 380

    Finally a few guys who used this system vouch for it. :clapping:

    I'm going to make one because of this thread. I wanted to before but no one would really step up in front of the board and say it. Tractor Supply is a few miles from my house.

    Thanks for all the info DJ Contracting.

    Peace,
    Gary
     
  7. DJ Contracting

    DJ Contracting LawnSite Senior Member
    Posts: 487

    Sure anytime.
     
  8. firelwn

    firelwn LawnSite Member
    Posts: 99

    This is why I don't visit lawn site to often. This place is full of little girls boo hooing about nothing at all. I f I wanted this crap I would of failed high school 6 years ago and stayed there.
    Come on people it's time to grow up and just give good decent advice, if you don't like what you see or read then voice your opinion don't get your thong in a bunch cause someone doesn't agree with what you say. *trucewhiteflag*
     
  9. MisterRatburn

    MisterRatburn LawnSite Member
    from NY
    Posts: 23

    The guys with the $20,000.00 machines think giving good advice means calling people fools and gypsies if they do any sealing with lesser equipment.
     
  10. firelwn

    firelwn LawnSite Member
    Posts: 99

    Good for them, but I was here to LEARN how to make a spray machine and then become COOL like them. Sorry that a little guy AS THEY WERE AT ONE POINT wants to make some coin as well. quit being little girls. It's a damn forumn that is supposed to help people not degrade them.
     

Share This Page