how to unglue pvc pipe

Discussion in 'Industry Surveys & Polls' started by debonderman, May 28, 2011.

  1. debonderman

    debonderman LawnSite Member
    from spokane
    Posts: 1

    hello any one ever want to unglue a pipe ?? i found a way to do it from 1/2 to 6"
    ck out this guys web site www.pipedebond.com
    :clapping:
     
  2. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,533

    I've used my Milwaukee heat gun and a pair of needlenose piers up to 1.5 inch SCH 40.
     
  3. GreenI.A.

    GreenI.A. LawnSite Silver Member
    Posts: 2,132

    that looks pretty symple. I usually take my recypricating saw and cut a line just about through the pipe by sticking the blade inside of the pipe. I don't cut all the way through so that I don't damage the fitting. I then heat it from the inside with my torch and once it softens I twist it right out with vise grip needle nose pliers
     

Share This Page