1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Hunter ICC-800-M Controller Question

Discussion in 'Irrigation' started by ed2hess, Jun 22, 2006.

  1. ed2hess

    ed2hess LawnSite Fanatic
    Posts: 13,192

    This controller is being configured for 36 stations. My question is will this controller run two valves at one time. It has 4 Programs A through D and says in the operating specifications "Maximum total output: 24V, 1.5A, (5 valves) includes master valve circuit".
  2. Dirty Water

    Dirty Water LawnSite Fanatic
    Posts: 6,799

    If your asking if you can double wire two valves and not overload the transformer, yes easily.

    If your asking if it will run two programs at once, you better check the hunter literature. Usually Program D (the Drip program) can run at the same time as the other programs, but it varies from timer to timer.
  3. ed2hess

    ed2hess LawnSite Fanatic
    Posts: 13,192

    Then maybe I can run A or B or C and D? I got the literature but can't tell.
  4. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,650

    Yep, D is for drip.

Share This Page