1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Hunter Side Strip Question

Discussion in 'Homeowner Assistance Forum' started by jmed999, Jul 31, 2013.

  1. jmed999

    jmed999 LawnSite Member
    Posts: 6

    I have a strip that is 90' by 5'. I'm going to use the Hunter MP strip rotary nozzles that are 5' x 15' for the ends and 5' by 30' for the side strip nozzles. Do I use all 7 nozzles all on the same side of the strip, 7 nozzles oscillating sides (so that every other nozzle is on the opposite side as the previous nozzle), or place 7 nozzles on one side and 7 nozzles on the other side? Which is the best answer for this design?

    Thanks! :)
  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 46,423

    Do you even have to use the rotary nozzles? Hunter makes a decent 5 x 30 spray nozzle.
  3. jmed999

    jmed999 LawnSite Member
    Posts: 6

    I have already purchased the rotary nozzles.
  4. Kiril

    Kiril LawnSite Fanatic
    Posts: 18,298

    Triangular spacing is the recommended layout for SS, however it depends on the scenario. I would consider and recommend doubling up on the corners if this area is surrounded by hardscape.

Share This Page