Husqvarna Spool Problems

Discussion in 'Lawn Mowing' started by dext0r, May 27, 2004.

  1. dext0r

    dext0r LawnSite Member
    from Ontario
    Posts: 1

    For the life of me, I can't get the spool on any of my Husqvarna 325 X Series to feed line properly.

    I have a feeling its getting put on wrong, and I tried my hand at it and came up with the same results as my crews.

    They're dual-line trimmers, and I'm using Laser .095 Square line. How are we supposed to go about feeding these spools?
     
  2. NCSULandscaper

    NCSULandscaper Banned
    Posts: 1,557

    are you winding the string on there the right way?
     
  3. husqvarna600c

    husqvarna600c LawnSite Member
    Posts: 103

    Husqvarna has used many different heads. They were also unhappy with their performance so they decided to make their own. Its a pro-tap t35 you can replace 28 feet of line in about 30 seconds. And the head assembles in your hand not upside down on the trimmer. So no more feeding the line through the holes.

    Which head do you have? and does it say universal products on it?
     
  4. specialtylc

    specialtylc LawnSite Bronze Member
    Posts: 1,656

    If you have the heads I think you do, it should show an arrow and CC or C clockwise. A straight shaft trimmer should be wound in the CC or counter clockwise direction on the spool.
     

Share This Page