1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Hustler Flex forks on Exmark

Discussion in 'Lawn Mowing' started by michaelee2, Mar 14, 2009.

  1. michaelee2

    michaelee2 LawnSite Member
    Posts: 151

    Have a 46" Exmark Hp and was wondering if the Hustler flex forks would fit it or has anyone tried this. Really like the looks of the flex forks and would like to have them. :confused:
  2. djagusch

    djagusch LawnSite Platinum Member
    from MN
    Posts: 4,231

    If you own a welder it can be put on any ZTR. I know they don't bolt to a Scag, not sure on the Exmark. But anyone could cut off the shaft and weld it on.
  3. Grassman6

    Grassman6 LawnSite Member
    Posts: 99

    Used 'em....broke 'em...bought a Ferris. However, the welding action is also a good plan. When welding the new Flex-Fork to your castor spindle plan to extend the attachment one inch, then on the rear of the machine add the next size larger drive tire thus allowing a slightly lower tire pressure and the ride improves significantly. Don't forget to check/adjust your deck pitch.

Share This Page