hydro-gear model # 95-1662 (326-0650) service manual

Discussion in 'Mechanic and Repair' started by milike, Sep 30, 2009.

  1. milike

    milike LawnSite Member
    from MI
    Posts: 169

    Hello all

    I have toro #71196 and the rear end is leaking...:dizzy:

    Appears the botton of the case is cracked (hairline crack) and is leaking...enough to the point it move nowhere.. :confused:

    SO I put it up on stands and when I spin the wheel the other does not move I mean both are independant reagardless if I apply the brake/clutch and i verified the free wheel lever position...kinda like some thing inside let go and crack the case???

    Is this possible....??

    Has any one split one of these and purchased a new lower case or welded it???

    Any help TIA


    Forgot to add..the hydro gear axle is a

    Hydro-Gear #326-0650

    I am looking for the service manual for steps on disassembly and reassembly....afraid when I open it parts will go every where.:hammerhead:
     
    Last edited: Sep 30, 2009
  2. milike

    milike LawnSite Member
    from MI
    Posts: 169


    Forgot again I do have this parts breakdown
     

    Attached Files:

  3. milike

    milike LawnSite Member
    from MI
    Posts: 169

    Well

    I cracked the case and found I need the (2) bevel gears and (2) planet gears...

    Unfortunately the websites I found only sell a full axle...:confused:

    Where can I get just the gears??????
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    milike,

    I work for a Hydro-gear dealer and checking my dealer's site, There's no break-down on this axle assembly. Looks like your stuck buying the assembly if you want to repair it or try finding a used transaxle assembly.
     
  5. milike

    milike LawnSite Member
    from MI
    Posts: 169

    Hey Thanks Restrorob :weightlifter:

    I hate the fact I need to buy the entire axle for just the 4 gears......arg!

    But buying a used one is not a bad idea either.

    Thanks
     
  6. milike

    milike LawnSite Member
    from MI
    Posts: 169

    well got my parts.


    any suggestions on the sealant i should use for the two case halves???













    .
     
  7. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    I use nothing but Permatex #5813 gasket eliminator on everything, Have never had a issue.
     
  8. jay albers

    jay albers LawnSite Member
    Posts: 178

    I just used form a gasket on mine seems to be workin ok. If i had to do it again i use a silocone, not as messy. good luck
     

Share This Page