hydroseeding vetch

Discussion in 'Landscape Architecture and Design' started by turfquip, Sep 19, 2002.

  1. turfquip

    turfquip LawnSite Senior Member
    Posts: 860

    I've been contacted to do a hydroseeeding application of vetch on a hillside. I'm a little nervous due to the cost of the seed and since the plan is for no hydromulch to be used, just seed and innoculant, I know i'll have to cover a lot of ground FAST.

    Any helpful suggestions out there?
     
  2. paul

    paul Lawnsite Addict
    Posts: 1,625

    Ed, here are a few hints.
    #1 Use some mulch the green helps you see where you have sprayed.
    #2 Mark off the area you need to seed in a grid, divide your seed into two amounts, that way you shoot the area twice and the grid helps you see how much your applying.
    #3 With crown Vetch use 3 time the innoccluant that you normally would use.

    One more thing about the mulch it helps hold the seed in suspension, giving you better dispersion.
     
  3. turfquip

    turfquip LawnSite Senior Member
    Posts: 860

    Thank you Paul!
     
  4. Sean Gassman

    Sean Gassman LawnSite Member
    Posts: 77

    You may also want to use a polycrelomid (sp?) tactifier. It will hold everything in place since you will be using very little mulch
     

Share This Page