I am replacing the seals in Hydro pump...HELP PLEASE!!

Discussion in 'Mechanic and Repair' started by ToroLandscaper, Feb 23, 2010.

  1. turfeater

    turfeater LawnSite Member
    from ohio
    Posts: 166

    found a way to make a tool to use that will reduce the chance of small metal particals from getting into pump . and it worked well for me .

    I took a med. large flat blade screwdriver and heated with a propane torch and bent a 90 on the end . I was able to work it under the top layer of the seal and tap with a small hammer to get it out ..

    HOPE THIS HELPS RT
     

Share This Page