I NEED HELP NOW...in proccess of putting on transmision

Discussion in 'Lawn Mowing' started by Orkin Yards, Mar 14, 2001.

  1. Orkin Yards

    Orkin Yards LawnSite Senior Member
    Posts: 256

    w/b transmision, i have the pulley off screws out but what do i do to get the couplings pulled off the transmision so i can drop my new one in there...thank-you in advance...faster the better!
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    what brand and model mower ?
    if your talking about the wheel drive belt pulleys, all you should have to do is unbolt the bearing assemblies on each side and slide the shaft and coupler assembly off as one.
     
  3. Orkin Yards

    Orkin Yards LawnSite Senior Member
    Posts: 256

    its a 48" scag...and what do the bearing assemblies look like
     
  4. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    they are the assemblies that the shafts coming out of the transmision go through
    should be 2 bolts that hole each one on....
    if you have aol im post it here and it will be easier to guide you through....
     
  5. Orkin Yards

    Orkin Yards LawnSite Senior Member
    Posts: 256

    sn is jrorkin
     
  6. Orkin Yards

    Orkin Yards LawnSite Senior Member
    Posts: 256

    sn is jrorkin
     

Share This Page