I need some help on LT rich products

Discussion in 'Pesticide & Herbicide Application' started by Moonlight, May 1, 2007.

  1. Moonlight

    Moonlight LawnSite Member
    Posts: 36

    Just purchased the z plugr with the seeder, sprayer and spreader attachments. I need to know what your seeder is set on for unhulled or hulled bermudagrass. Called the LT Rich factory and they have no idea on the dial settings on the seeder. Any help would be appreciated. Also, what are your settings for the fertilizer spreader. No information was sent with the machine. Thanks again for you help.
     
  2. morturf

    morturf LawnSite Senior Member
    from midwest
    Posts: 477

    You can do a lot by doing a dry run on a set area and time your pass. Then put the product (seed or fert) in your hopper and open it up for the time you made your pass. A little trial and error and you will get close to perfect. I have done this many times. They don't send you anything because there are so many types of seed, seed mixes and fert types that you have to calibrate it yourself. Good luck
     

Share This Page