ICC Controller

Discussion in 'Irrigation' started by MWM, Aug 17, 2003.

  1. MWM

    MWM LawnSite Member
    Posts: 102

    17 Zones. 3 Modules so they can add on later. 2 runs of 12 strand wire. How do I wire in the common wire? 2 Modules need the same common bu not all three. Can I just wire in a jumper for the common?
     
  2. JeffY

    JeffY LawnSite Senior Member
    Posts: 324

    You can use a jumper wire from one module's common station to the second module's station. I've done it many times when doing large installs.
     
  3. greenworldh20

    greenworldh20 LawnSite Senior Member
    Posts: 659

    i don't think all modules need a common wired to them...common can be wired to one module and it will work...

    brian
     
  4. Planter

    Planter LawnSite Member
    from Utah
    Posts: 214

    I put one in this week and I did one common to the top (factory installed) module. Worked.
     

Share This Page