Ice-go-way sanders

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by John DiMartino, Jan 22, 2000.

  1. John DiMartino

    John DiMartino LawnSite Silver Member
    Posts: 2,555

    Isen one of these in an F550 andit was 1.8 yrds and had an extension to get anothe 1/2 on top.It looks well built,is stainless and I love the quick release chute,pull two pins and you can set it on the ground flat of dump with it in the truck.Does anyone have these and how much do they cost (gas engine).
     
  2. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I think they are close in price to most others. They are built out of lighter gage metal, and are very light. If you want another all electic check out a downeaster, they are priced very well.<p>I think the i go away are built in CT.<p><br>Geoff<br>
     
  3. John DiMartino

    John DiMartino LawnSite Silver Member
    Posts: 2,555

    Geoff,I have a gas powered unit(5hp briggs),I have no experience with electric,but if you say that they are good and proven I'd try one.I just cant see a 12V motor having enough power to throw sand and convey it to.<p>----------<br>John D<br>
     
  4. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I had a hard time believe it myself. My brother is an eletrical engineer and told me that with the right motor it's not an issue. I am sure that when the build the electric sanders, they find an engineer to find the right motor. I don't own an electric one, only i have talked to someone about them and he has had no problems.<p>Geoff
     
  5. John DiMartino

    John DiMartino LawnSite Silver Member
    Posts: 2,555

    Is there a price difference? Just what my alternator needs another high amperage draw in the middle of a snowstorm!I bet the electric is lighter-defintely alot quieter around residetials is a plus.<p>----------<br>John D<br>
     
  6. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    I think the electric is less money. I would want at least a 95 amp, thats all they have in their electic sander. It is set up on a F 250 HD pick up. The other thing that my brother told me if i ever got one was to do add an extra battery. Get a deep cycle marine battery something that really holds a charge and takes a beating. When you wire the sander add the battery at some place in the system. This will build up an electric reserve, which will make the draw a lot less. The other thing is the motors used on all electric sanders are designed to run cool for a long period of time, with a very small power spike at start up. So electic motors will require a huge draw to start them up, and once they are running slow right down, these motors require little to start, and the draw isn't too bad. Check them out at www.sandspreader.com<p>Geoff
     
  7. John DiMartino

    John DiMartino LawnSite Silver Member
    Posts: 2,555

    thank Geoff,I'll check them out.I'm watching news as I write this-they are talking about a noreaster on wednsday night!bring it on.<p>----------<br>John D<br>
     
  8. GeoffDiamond

    GeoffDiamond LawnSite Bronze Member
    from Maine
    Posts: 1,651

    It will be nice to get the &quot;big one&quot;. We have missed two good size storms this week, up in maine. They have gone too far out to sea, maybe this next one will hit us. I have this tv card so i can watch tv and write at the same time, explains some of my typos.<p>Geoff
     
  9. n y snow pros

    n y snow pros LawnSite Senior Member
    Posts: 252

    You can find pricing and other info on ice a way sanders and other sanders ,and excellent pricing from a co called Trailler king.They are located in Poughkeepsie N.Y. telephone is 914-454-7500.Ask for Steve he can give you all kinds of info.<p>----------<br>J PARKER<br>914-485-4200
     
  10. plowking35

    plowking35 LawnSite Bronze Member
    from S.E. CT
    Posts: 1,687

    These are the actual makers of the ice-o-way spreaders. Nice people and SIMA members. Give them a shout if you have any more ??<br>Southford Truck Equippers LLC / Associate Member<br>Mary & Mel Tomlinson<br>Dino<br>PO Box 174<br>1380 Southford Rd <br>Southbury CT 06488<br>Phone: 203-267-6337<br>Fax: 203-262-1405<br>Manufacturer, Distributor, Marketer of Ice Control Equipment<p><p>----------<br> Professional Ice and Snow Management <br>Products:Services:Equipment www.sima.org
     

Share This Page