Ih 1486

Discussion in 'Heavy Equipment & Pavement' started by cat2, Apr 6, 2010.

  1. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891

    Neighbors tractor, Was working a field all of a sudden the tractor quit moving,it didn't grind any, or make any strange noises, it goes in all the gears, but it won't move. Any idea whats wrong? Probably have to look for a different transmission :cry:
     
  2. ksss

    ksss LawnSite Fanatic
    Posts: 7,128

    That tranny is caveman simple. Could be broken output shaft, or something to do with the T/A.
     
  3. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891



    Brand new T/A Output shaft something fairly easy to replace? Don't know much about IH's all JD's here and with those you don't have to work on them very often :rolleyes:
     
  4. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891

    Do ya have to split the tractor in half to replace the output shaft? Is there any cover you can take off to look at the shaft to see what condition its in?
     
  5. Ausman

    Ausman LawnSite Senior Member
    Posts: 262

    Do you have power steering?
     
  6. Ausman

    Ausman LawnSite Senior Member
    Posts: 262

    If it has done a sprag bearing in the TA it will drive in direct drive but not TA

    If you have no steer you have done an AUX input shaft, that is the large spline in the pressure plate.
     
  7. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891



    Yes...................
     
  8. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891




    Where ever you put the t/a it won't move
     
  9. cat2

    cat2 LawnSite Senior Member
    from Mi
    Posts: 891

    Another guy thinks its the output shaft, lets say it is the output shaft, would he have to replace the T/A also?
     
  10. Ausman

    Ausman LawnSite Senior Member
    Posts: 262

    ok pull the 2 bolts off the clutch inspection port under the clutch housing and see if you got busted springs and stuff in there, im thinking you have torn the centre out of your clutch plate do the gears grind?
     

Share This Page