Illustrated Parts List for Stihl 4-Mix

Discussion in 'Lawn Mowing' started by Merkava_4, Feb 27, 2010.

  1. Merkava_4

    Merkava_4 LawnSite Bronze Member
    Posts: 1,280

    This is a long shot, but do any of you guys have the IPL
    for the Stihl 4-Mix engine? Stihl is the only company that
    doesn't provide IPLs for download at their website. I'm
    curious as heck what the engine looks like on the inside.
     
  2. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    Here some pics of a BR600 engine my dealer gave to me to tear apart.

    [​IMG]

    [​IMG]

    This pic shows the valve guide that has dropped. That was the issue with the early BR series of 4 Mixes. If you look to the bottom right of the pic you can see a valve sticking out of the top of the piston. That's what happened if the valve guide dropped too far.

    [​IMG]
     
  3. mds2000

    mds2000 LawnSite Member
    Posts: 73

    on my km90 last fall while in the middle of hedges i lost a valve spring washer droping a valve into the cylinder stopping it dead and doing no damage what so ever.
    a cheap fix a new km110(needed to finish the job from hell and besides the shop needed a new trimmer dear) it was like 20$ in parts and like 40$ it tools/6 pack all is well.
    the problem was from carbon build from regular stihl oil i now use stilh synthetic .
    it happened about 5-6 tanks in from switching to synthetic (good stuff) it actualy started to break the cabon off and got a peice stuck between the valve and seat not closing all the way smaking the rocker into the valve with force breaking the washer.
    shop manuals are online you just have to look a bit.
     

Share This Page