Im getting a new enclosed...

Discussion in 'Starting a Lawn Care Business' started by Lamonicaslawnservice, Sep 2, 2008.

  1. trailer tonight. Its only a 12 by 6 v nose but its a start. Do you guys buy trimmer and backpack blower racks or just buy stuff from a hardware store to hang up equipment? Any help on this would be great. Any pictures would be great too. I just want it to be organized with everything. thanks
  2. lone wolf

    lone wolf LawnSite Member
    Posts: 102

    I have a 6'x12' also. I have the HPV and a 55 gallon barrel in the front.
    I have a 21" behing the barrel. And the ZTR behind the 21". Back pack blower
    on the left side wall. And I have the trimmer and stick edger hung on the roof
    with heavy duty hooks on the right side above the ZTR. I built a 3'x5'x3' steel toolbox that I mounted on the tonque. It works excellent. If you have questions, let me know
  3. GreenAcresLC

    GreenAcresLC LawnSite Member
    from KY
    Posts: 84

    Here is a pic from the inside of my 6x12 v-nose. I plan on changing around a few things as the season comes to an end: rebuild trimmer racks, spare tire rack, fuel can securement, paint, etc... Since this pic was taken, I built a rack in the drivers side rear to hold shovels, rakes, etc. Inside the nose are 2 shelves, top is for gas cans (currently), bottom is for blowers and extra parts/pieces. Along the drivers side top is a shelf mounted with 12" angle brackets secured to the steel studs and bolted to the roof. this shelf houses extra oil/parts, hedge trimmer, chain saw, shears, loppers, wrench set, socket set, battery powered impact. Right side is home of the trimmer racks. In front is 36" exmark WB on left, 21" on right, both tucked underneath the bottom shelf of the front. In the back is my 52" ZTR, backed in to help move the weight toward the front of the axle. Backing in helped with weight distribution, and was easier to get on/off mower. Hope this helps. Oh, inside the side door is my fire extinguisher and first aid kit, both good things to keep on the trailer.

    Inside Trailer1.jpg
  4. that looks good. Thanks for the pic. I brought it home tonight so im going to start organizing and hanging stuff up tomorrow. I love it tho. I will get a pic of it tomorrow and post it on lawnsite. anyone else have any pictures of the inside of their trailers?
  5. jimithing31

    jimithing31 LawnSite Member
    Posts: 145

    I too just got a 6x12 V-nose. I made my own trimmer/edger/hedger and blower hangers. Used hooks and 2x4's to reinforce them to the wall. I will post pics tomorrow. I am going to build a few shelves into the nose this weekend and some setup for rakes, shovels etc.

    I like the setup in the pic.
  6. jimithing31

    jimithing31 LawnSite Member
    Posts: 145

    GreenAcres do you have any other pics of the inside?
  7. GreenAcresLC

    GreenAcresLC LawnSite Member
    from KY
    Posts: 84

    I've gotta unload some of the equipment later today to service, I'll take some better, closer pics then.
  8. jimithing31

    jimithing31 LawnSite Member
    Posts: 145

    Here are some pics of the setup so far. I am building some shelves in this weekend and other odds and ends.

    I got the hooks at Home Depot. Works pretty well and cost me $22.00 total

    today 005.jpg

    today 007.jpg

    today 010.jpg

    today 011.jpg

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,566

    Looks good,boy your grass is green lots of
  10. Frontier-Lawn

    Frontier-Lawn LawnSite Silver Member
    Posts: 2,949

    don't forget getting some bungee cords to keep the stuff on the hooks. 1 good bump in the road and your equipment goes flying around.

Share This Page