Info on my stander i bought used

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by TheBigGW, Jun 17, 2008.

  1. TheBigGW

    TheBigGW LawnSite Member
    from MA
    Posts: 150

    Just curious as to how many grease fittings i should be looking for i bought a 2007 23kaw 52 cut i have found 4 total on front casters and 2 under the deck lid were the belts are. Can you tell me how many more there are if any. Also can you tell me the rite hydro filter and number needed so i can change it thanks.
     
  2. WrightCommercial

    WrightCommercial Inactive
    Posts: 526

    TheBigGW,

    You should find one more grease fitting on the idler arm of the drive system under the engine deck. The part number for the filter available at our dealers is 34490002, if you look aftermarket, besides the fit to the filter housing make sure the filtration level is 25 micron.

    Best Regards
    Wright Mfg. Service Department
     

Share This Page