1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Interlocking Block Wall 80 X 4 ??$$$

Discussion in 'Landscape Architecture and Design' started by jccordes2, Jun 18, 2004.

  1. jccordes2

    jccordes2 LawnSite Member
    Posts: 124

    I put a bid in on a block retaining wall, I charged $10 a Square foot plus extra for top caps. the blocks are 12'' interlocking blocks.
    bid consists of (1) 80x4 wall and (2) 20X2 walls

    does price per square foot sound about right, includes labor and materials??

    to low? high?

    I have a an old friend who does concrete and block work fulltime.
    we bid $5080 for the job, my friend bills out $60 an hour for the bobcat when running, minus the materials, we split the rest.

    how does this sound??

    Jeff
     
  2. Agricare1

    Agricare1 LawnSite Member
    Posts: 17

    Thats way to cheap. I am a distributor of Versa-Lok retaining wall systems here in Connecticut and my COST is $4.77 per SQ. FT just for the blocks, then you have to factor in the COST of the crushed stone, stone dust, any backfill material and drain pipes, and then theres labor to prep the area and install the blocks. $20.00 per Sq.Ft. is about average in our area for a standard block wall.



    BIG AL
     
  3. GreenMonster

    GreenMonster LawnSite Silver Member
    from NH
    Posts: 2,702

    Based on the cost of that particular block, I'd say your price is about half way there:(
     
  4. jccordes2

    jccordes2 LawnSite Member
    Posts: 124

    My friend did mention average in our area was between $15 to $20 a SQ FT. He thought by bidding it low it would help me get the rest of the landscaping work their to?
    I saw a thread above at $28 sq ft. but that included the back fill to raise the elevation. we have hardly any back fill as the evlevation is already there
     
  5. Agricare1

    Agricare1 LawnSite Member
    Posts: 17

    You make a good point about keeping price low to get other work, i have done that several times with Hydro-seeding for a large contractor in our area just to get all of his work, however you don't want to work for nothing. What is your actual cost for materials? If you can do the job correctly at that low price and you are going to warranty your workmanship just be sure that you make enough for the headaches that may come later. 80 FT is not a small wall by any means and the time that it may take you just to get the ground level for all of that 80 feet is going to take up some time. I just don't believe in working for free.
    If you have no overhead, IE: payroll , insurance, taxes, ETC. than go for it but when you have all those things it's hard to do a job for that little profit.
     
  6. jccordes2

    jccordes2 LawnSite Member
    Posts: 124

    Agicare1

    Actually there is no excavation needed, or very little, when the home was built last year they elevated the back of the home and back filled leaving a perfect slope for a wall and is already level to a certain point, of course the basefill will fill in.
     
  7. NNJLandman

    NNJLandman LawnSite Bronze Member
    Posts: 1,306

    $10.00 per sqft....you wanna come down here in subcontract heh, way to cheap try like $20-25 per sqft. So i'm thinking like $8000 just for wall installation.

    Jeff
     
  8. steve in Pa.

    steve in Pa. LawnSite Senior Member
    Posts: 294

    that is way too cheappppppppp!! around here we get anywhere from 17-25 dollars a sq ft.
     
  9. D Felix

    D Felix LawnSite Bronze Member
    Posts: 1,898

    So you are saying that they were nice and thought ahead and went ahead and dug out a base trench? Somehow I doubt that.

    A 4' high wall probably will not be a free-standing wall. My guess is that installation specs from any block manufacturer state that for a wall that high, you will need geogrid. Probably just one layer.

    And a 4' high wall, above grade, will mean around a 5' overall hieght, by the time you bury the first course.

    Sounds like somebody (or somebody's), don't know what they are getting into on this. I hate talking $$$ here, but it's safe to say that the price you stated is WAAAAAAAAAAAYYYYYYYYYYYYYYY too low! We would have been looking at that amount (maybe more) for just the labor end of it, excluding materials, tax and equipment!


    Dan
     
  10. landscapingpoolguy

    landscapingpoolguy LawnSite Senior Member
    Posts: 819

    $12 a sq ft plus the cost of the stone, You should be more around 8 - 9k

    Chuck
     

Share This Page