iron for lawns

Discussion in 'Pesticide & Herbicide Application' started by RAlmaroad, Jan 23, 2007.

  1. RAlmaroad

    RAlmaroad LawnSite Silver Member
    from SC
    Posts: 2,216

    What would be the best procedure for adding a little (5%-10%) iron to a lawn. Lesco products have fertlizer with them. I'd rather use a liquic Fe if possible.
    Thanks, Roy
     
  2. heritage

    heritage LawnSite Bronze Member
    Posts: 1,283

    Roy,
    You could do a search. For turf it's pretty common to use a 6% Iron product, at the application rate of 3oz. of product per 1000 Sq. Ft. In as little as 1 Qt. and up to 2 Gal. water per 1000 sq. ft. as your carrier.

    Pete
     

Share This Page