Is a chain striper for ZTR ok for a ,,,,,,,,,,

Discussion in 'Lawn Mowing' started by tkcrabby, Aug 7, 2006.

  1. tkcrabby

    tkcrabby LawnSite Member
    Posts: 53

    1.5 acre yard with a few fairly rough spots in it?

    One basically like this one,, would it work well?

    IF so I guess I'll try making one from parts I get at Lowe's

    Chain striper kit.jpg
  2. Daner

    Daner LawnSite Bronze Member
    Posts: 1,308

  3. tkcrabby

    tkcrabby LawnSite Member
    Posts: 53

    Thanks for the reply,,, I'll have to make one then! :)
  4. dcondon

    dcondon LawnSite Silver Member
    Posts: 2,246

    I would have those caught on all finds of things. That will not work in this area.:nono:
  5. tkcrabby

    tkcrabby LawnSite Member
    Posts: 53

    I've also been thinkin' about a heavy rubber type bolted to the rear lower edge of the deck, this type should work well for me because I only mow my own yard with the ZTR it would be mounted on and always at the same height.
  6. LawnGuy73

    LawnGuy73 LawnSite Bronze Member
    Posts: 1,945

    Lets see some pics of how it stripes.
  7. tkcrabby

    tkcrabby LawnSite Member
    Posts: 53

    I haven't made anything yet,,,,,, I'm leaning now towards a rubber flap model.
  8. DJ Contracting

    DJ Contracting LawnSite Senior Member
    Posts: 487

    Rubber flap works just fine, have it just long enough to touch a flat surface like a concrete or asphalt driveway, good luck and make sure you post pics soon.
  9. tkcrabby

    tkcrabby LawnSite Member
    Posts: 53

    "make sure you post pics soon."

    Sure will, but it may be a while before I get this done, when I do I will be sure to post the pictures.......... thanks!!!!
  10. firecapt13

    firecapt13 LawnSite Member
    from NC
    Posts: 96

    onyone use rubber mudflaps for this? i was going to try this on my ztr and wb

Share This Page