Jacobsen parts help

Discussion in 'Mechanic and Repair' started by FerrisDJB, Sep 19, 2005.

  1. FerrisDJB

    FerrisDJB LawnSite Member
    Posts: 42

    I've got an older Jacobsen 19" pusher that needs help. The wheel height adjuster tang has broken...without this she has no control of height of cut. Its very old (1974 or so) but the chassis is made from Magnesium and is ultra light and very strong. I really rely on this one due to its weight and ease of manuvering. Circa mid 70's manual .( no power ) What I need here is a parts locator/dealer for this mower, actually any dealer near or far will do. Thank you in advance for any help offered
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    I had the same problem with a old Toro with the mag. deck, I took the wheel off and drilled a 1/4" hole through the wheel adjuster and the deck and installed a long scerw. Easy fix.
    You can check this link for a dealer near you or contact them with your request.
    http://www.jacobsencorp.com/
     
  3. Grassmechanic

    Grassmechanic LawnSite Silver Member
    Posts: 2,697

    If you can take a picture of it, I may be able to match it up for you. I have several of those decks laying around.
     

Share This Page