Jungle Jims weldable

Discussion in 'Trucks and Trailers' started by kawasaki guy, Aug 16, 2013.

  1. kawasaki guy

    kawasaki guy LawnSite Fanatic
    Male, from S. New Jersey
    Posts: 11,496

    Hi guys,

    Could I weld on the 2 trimmer rack from Jungle Jim to my new trailer when it comes, or are they only bolt on racks. If you can weld, tell me good points to weld to on a Belmont Machine UT508R utility trailer, and if not tell me a good way to bolt them on. Thanks!
     
  2. CLARK LAWN

    CLARK LAWN LawnSite Silver Member
    Posts: 2,526

    You can weld them but I personally would bolt them on.
     
  3. gusndemboyz

    gusndemboyz LawnSite Member
    Posts: 35

    Bolted mine so they would stay removable, although I have only removed them once in the last 10 years.
     
  4. agrostis

    agrostis LawnSite Silver Member
    Posts: 2,268

    Use carriage bolt's and tack weld the nut to the bolt shank, theft proof and removable.
     
  5. jsslawncare

    jsslawncare LawnSite Bronze Member
    Posts: 1,674

    Pick a spot on the trailer where you want them mounted. Grind the paint off where you will be welding. Mount and weld away.
     
  6. kawasaki guy

    kawasaki guy LawnSite Fanatic
    Male, from S. New Jersey
    Posts: 11,496

    here s a picture of the trailer. [​IMG] what is a good anchor point to bolt and weld to? and, here is a picture of the racks. [​IMG] i see in the rack pic they have the racks bolted on the rails. but is that the right way?
     

Share This Page