just wondering.. on using trimmer..

Discussion in 'Lawn Mowing' started by mowisme, Jul 3, 2013.

  1. mowisme

    mowisme LawnSite Senior Member
    Posts: 888

    Sometimes I let the bottom of my speedfeed head ride on the grass when either reaching under something or catching some grass area trim mowewr wouldn't get too. Is this a no-no to let head ride or touch ground while trimming? ( not meaning the bump to feed) I'm sure constant would premature the wear, but I'm talking just couple times per lawn. In most cases I get better trimming at slight forward angle but occasionally need to let it ride flat on ground.
     
  2. Hawkshot99

    Hawkshot99 LawnSite Senior Member
    Posts: 944

    Just make sure its not so low, that you are not scalping the lawn.
     
  3. ncnurseryman

    ncnurseryman LawnSite Member
    Posts: 121

    I do that sometimes with no ill effects.
     
  4. weeze

    weeze LawnSite Fanatic
    Posts: 8,024

    grass doesn't hurt it so much. just dont' do it on concrete or asphalt. it will wear the head out quickly.
     

Share This Page