Kaw governor setting

Discussion in 'Mechanic and Repair' started by tpearson, Aug 23, 2006.

  1. tpearson

    tpearson LawnSite Member
    Posts: 1

    How do I set the governor on a FD590V Kaw. It has been off. I tuned it counter clockwise with the carb trottle open and set it there, engine runs good until put under a load then it loses power.
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    First of all [​IMG] to LawnSite.

    Below is the procedure from the Service Manual;

    Good Luck

    Kaw FD 590 Gov Adjustment.jpg
     

Share This Page