Krik-It Kwestion

Discussion in 'Irrigation' started by jcom, Aug 6, 2006.

  1. jcom

    jcom LawnSite Senior Member
    Posts: 791

    I am still trying to find the mystery valve. I have the water off and no pressure. I found 4 valves in a box and only one of them will activate the Krik-It. I went directly from the controller (Hunter SRC) to the common wires on all four and only one would work and as stated above, my ear had to be withing inches to hear anything but the pulse from the Krik-It was definitely there.

    Just to make sure the Krik-It was working as it should, I hooked it up to my personal system and it is working great. Can hear it from a long ways off.
    My system has the solenoids above ground and the customers are buried.

    Any ideas?

    John:cry: :cry: :cry:
  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,702

    What are the results of your resistance measurements on the system wiring?
  3. DanaMac

    DanaMac LawnSite Fanatic
    Posts: 13,156

    I haven't used one before, but make sure the water is off and DRAINED from the mainline. That is supposed to help.

Share This Page