Kubota 1800GF help

Discussion in 'Mechanic and Repair' started by re151731, Jun 25, 2004.

  1. re151731

    re151731 LawnSite Member
    Posts: 32

    Does anyone out there have experience on a Kubota GF1800?
    I have discovered the mower is sagging 1/2 inch lower on the rh side rear. The frame of the mower is almost laying on the rh rear swivel axle.This is making it difficult to adjust the mower, blade height. I have temporarily compensated with front mower wheel height but this sagging concerns me. Thanks in advance for any help.
     
  2. Craftybigdog

    Craftybigdog LawnSite Senior Member
    Posts: 425

    Any pictures!!!!!!!!!
     
  3. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,098

    It sounds like you may have a broke frame or transmission/trans-axle mount
     
  4. re151731

    re151731 LawnSite Member
    Posts: 32

    I inspected the frame,xmission mounts and all are in tact. Would the endpaly ajustment for the rear swivel axles possibe contribute to this? I jacked the rear end and checked for excessive looseness and it appeared to be ok.
     

Share This Page