KX 41 Rake Needed (see pic)

Discussion in 'Heavy Equipment & Pavement' started by turfquip, Oct 4, 2007.

  1. turfquip

    turfquip LawnSite Senior Member
    Posts: 860

    Boy one of these would be handy. Can anyone suggest a manufacturer of a rake suitable for my 3500 lb. machine? This one is made in England and they WONT ship one. Yes, I can tooth material out of a pile pretty good with an 18" bucket, but this would be used to scarify hard ground prior to topdressing and or seeding. I would be aiming for approximately 2" of penetration.


    Also - what about a small concrete breaker for my 41. Kubota actually makes a small breaker especially matched to the machine. My question is - how productive are these small breakers? Will they break up 6" concrete? Is it extra hard on the machine to use a breaker - seems like it would vibrate a lot.

    DUSTYCEDAR LawnSite Fanatic
    from PA
    Posts: 5,137

    find an old bucket to cut up for the mount and make your own rake
  3. minimax

    minimax LawnSite Senior Member
    Posts: 734

  4. NateV

    NateV LawnSite Senior Member
    Posts: 340

    We have one for our kobelco 45 made by Kenco. Bought it about 5 yrs ago and have never once used it, and i dont know what we paid for it i would have to ask dad.
  5. turfquip

    turfquip LawnSite Senior Member
    Posts: 860

    Minimax - that's a nice rake! You did a great job with that thing. How wide are the teeth?

    Nate, I'm going to try and find a photo of a Kence rake on the web. Thanks for the info.
  6. minimax

    minimax LawnSite Senior Member
    Posts: 734

    turfquip,the rake 24" wide and the tines are 14" long with the teeth to the first cross bar and the teeth an shanks are 23 style backhoe teeth, and the tine are 3/4" t-1 steel.

  7. cddva

    cddva LawnSite Member
    Posts: 189

Share This Page