Landpride/trailer setup

Discussion in 'Hustler Turf Equip (Archived)' started by landpride, Nov 14, 2013.

  1. landpride

    landpride LawnSite Member
    Posts: 76

    I have a 2005 Landpride AccuZ60 with the 23hp Kawasaki engine with just over 500 hours on it.
    I want to hook up a yard type trailer to it, but concerned about whether this will harm the hydraulic system or quicken its wear.
    Thanks.
     
  2. hustlermidwest

    hustlermidwest LawnSite Senior Member
    Posts: 636

    I do not know what trans they put into the unit. If you get the model of trans Hydro gear will be able to tell you the max weight that the unit can handle.

    Brian O
     
  3. sbrickhouse89

    sbrickhouse89 LawnSite Member
    Posts: 18

    I believe this was like the Hustler Z in the same year. I think bumpers, seats, and maybe a couple small parts were also changed.
     
  4. hustlermidwest

    hustlermidwest LawnSite Senior Member
    Posts: 636

    I want to answer you but I want to answer you correctly, not a shot in the dark. a small lawn cart filled with leaves is different than filled with rocks and going up hill. Without knowing the specifics I really don't want to give you miss information. I know Hustler made that unit but very possible to landpride specs.
    Just don't want to mess you up.
    Brian O
     
  5. hustlermidwest

    hustlermidwest LawnSite Senior Member
    Posts: 636

    My best guess would be 50lbs hitch weight(tongue weight) and a total of 500lbs including the operator. If you have a separate pump and wheel motor those seem to be the basic numbers. As long as those twigs don't turn into a big pile of logs you should be ok. Monitor your trans oil heat, that would be the first sign of over working.

    Brian O
     

Share This Page