Lawn striper

Discussion in 'Lawn Mowing' started by huntw11871, Apr 8, 2008.

  1. huntw11871

    huntw11871 LawnSite Member
    from NC
    Posts: 71

    I am looking for a good lawn striper for my hustler mini z 52in. Does anyone have one on there hustler? Or what to get that is a good product.
     
  2. HELLO, I OWN A SUPER Z 60" AND CHECKED ON A STRIPE KIT ON HERE AND THEY ARE A LITTLE OVER A 100 BUCKS. THEY BOLT ONTO THE BACK ACCORDING TO PJ. I BOUGHT A RUBBER TRUCK MAT FROM TSC AND TWO METAL STRIPS, A FEW BOLTS AND MADE MY OWN. I MADE IT 35" WIDE x 8" TALL AND USED THE LOWER TWO HITCH HOLES TO MOUNT. THE REAR WHEELS DO THE REST. PLUS THE STRIP KIT DOESNT GET NEAR THE REAR WHEELS WHEN IN REVERSE. PLUS I CUT MY METAL DISCHARGE CHUTE DOWN AND USED MORE RUBBER MAT TO MAKE MY OWN FLEXIBLE DISCHARGE CHUTE. I USED LESS THAN HALF OF THE MAT, SO I HAVE PLENTY FOR THE FUTURE IF NEEDED, BUT IT IS WORKING GREAT SO FAR. I AM ALSO USING THE METAL STOCK CHUTE TO FABRICATE A OPENING COVER FOR LEAF MULCHING. I MADE ALL THIS FOR ABOUT 50 BUCKS. GOOD LUCK.
     

Share This Page