1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

lazer hp blow out

Discussion in 'eXmark' started by Rich's Lawn Care, May 2, 2003.

  1. Rich's Lawn Care

    Rich's Lawn Care LawnSite Senior Member
    Posts: 376

    i'm geting a lot of blow out on my ultra vac i have the lazer hp 52" . it's blowing out around the two bags in the back is this normal?
  2. 65hoss

    65hoss LawnSite Fanatic
    Posts: 6,360

    You need the antiblowout baffle.
  3. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Rich's Lawncare,

    Is the debris coming from the bags or from the hood/bag seal area?

    The bags will allow some dust and possibly a slight amount of debris to escape as the air escapes though the material. This is normal. You will also see some dust/debris escape from the hood vent. This is normal as well. If however a large amount of debris escaping where the bag and hood meet I would verify the bag frames haven't gotten bent, the hood screen is clean and the bags are clean as well.

    Please let me know if I can be of any further assistance.

  4. Blessed 1

    Blessed 1 LawnSite Senior Member
    Posts: 516

    I have the same problem with grass blowing out the end of the left side of the bagger,between the hood and the bag assy. Its a pain, but it seems to help if I open the hood and pull the bag as far left as possible.

Share This Page