Lazer HP hydro belt

Discussion in 'eXmark' started by Dependable Mowing, Apr 23, 2006.

  1. Dependable Mowing

    Dependable Mowing LawnSite Member
    Posts: 27

    I bought a used (2003 I think) 20/48 lazer hp last year with 80 hours on it. The hydro belt had to be replaced at a little over 100 hours. Now, at 180 hours, it needs replacing again. This thing is eating up the hydro belt like crazy. None of the pulleys seem to be bent, and I keep the idler greased. I have heard about this problem on other hps. What's the fix?
     
  2. lazer9284

    lazer9284 LawnSite Member
    from florida
    Posts: 50

    service buletin 04-04 is what was done to correct your problem, ask your dealer to do that update to your mower. its a pulley, belt and idler arm (cog belt) whole kit under $40.00 , only warranty if long history of problems....... all must be documented( service records under warranty) and primary owner too. so spend the 40.00 it will fix the belt life
     
  3. Dependable Mowing

    Dependable Mowing LawnSite Member
    Posts: 27

    Thanks for the info. Does anyone know what the part number is for this kit?
     
  4. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    UNITS AFFECTED: Lazer Z HP units with serial numbers 439,999 & Below

    103-5591 for the LHP 44” & 48”.
     
  5. Dependable Mowing

    Dependable Mowing LawnSite Member
    Posts: 27

    Thanks a lot....just curious....does exmark have a place where they post these service bulletins?
     
  6. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    In the dealer section...
     

Share This Page