lazer hp purchase

Discussion in 'eXmark' started by kamiakaze, Jan 14, 2007.

  1. kamiakaze

    kamiakaze LawnSite Member
    Posts: 15

    Ijust bought a lazer hp with a 23 hp kawaski and a 50 inch triton deck,its a 2006 demo,it has 100 hours on it,anything i need to know or look for,also wondering about the turf stripe kit,i have about 2 acres that i will be mowing. also is the recall for the deck worth messing with.thanks
     
  2. Potchkins

    Potchkins LawnSite Senior Member
    Posts: 570

    if it's the 07' update speed-up kit
    and i think different air flow baffles
    it should improve the quality of your cut

    hope this helps
     
  3. kamiakaze

    kamiakaze LawnSite Member
    Posts: 15

    thanksfor your reply, hope it works as well as they claim, havent had the update done yet ,was wondrening if i should or not,dont want the mower tired up at the dealer to long ,thanks again
     
  4. Potchkins

    Potchkins LawnSite Senior Member
    Posts: 570

    depending on your local service dept

    might do it while you wait... hour maybe hour and a half
     
  5. EMTDUCK1984

    EMTDUCK1984 LawnSite Member
    Posts: 180

    Im About To Do An Update On One Ill Let You Know What The Customer Thinks
     
  6. iowa

    iowa LawnSite Senior Member
    from NW IA
    Posts: 305

    Speed up kit is for '06 model Triton decks. Should be free.
     
  7. EMTDUCK1984

    EMTDUCK1984 LawnSite Member
    Posts: 180

    On Models That Are Having Cutting Problems Exmark Has A Kit Out To Redirect The Air Flow Of The Deck Change The Spindle Pulleys And Move The Idler Arm To Get A Better Cut. The Smaller Pulleys Speed The Blade Tip Speed Back Up To 18,500 Fps
     
  8. EMTDUCK1984

    EMTDUCK1984 LawnSite Member
    Posts: 180

    It Is A Fix By Fail Warranty B/c Not All Triton Were Having This Problem
     

Share This Page