Lazer HP spindles and front axles.

Discussion in 'eXmark' started by HighGrass, Sep 23, 2003.

  1. HighGrass

    HighGrass LawnSite Bronze Member
    from Z5 MA
    Posts: 1,237

    Lazer HP spindles and front axles.
    Why was the design as such that greasing becomes more than giving the front end a couple of pumps of grease? According to the addendum I got, I now have to take the front axles apart (every40hrs?) just to put grease in them. And I also have to buy a new seal kit.
    Seems to me like grease fittings could be incorperated into the spindle area and on the front axles as well.
    Is this something I can modify?
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    HighGrass,

    There must by a typo on the document you have.

    The front caster pivots and wheel bearings only require annual maintenance.

    Thanks

    Terry
     
  3. HighGrass

    HighGrass LawnSite Bronze Member
    from Z5 MA
    Posts: 1,237

    I'll double check and re-post...
     

Share This Page