Lazer Z Deck Question

Discussion in 'eXmark' started by DC9669, Mar 19, 2008.

  1. DC9669

    DC9669 LawnSite Member
    from Alabama
    Posts: 3

    I have a 2005 Lazer Z HP with a 48" deck. I bought it used and it has a mulch kit installed. My question is that there is a baffle of some sort installed under the deck on the cutting area near the blade that would be the discharge side of the deck. Should this be under there? If it is supposed to be there should it be parallel with the edge of the deck or at a 45 degree angle with the deck. There is only one bolt holding it.

    Thanks In Advance


Share This Page