Lazer Z HP Blades will not engage

Discussion in 'eXmark' started by trimmasters, Sep 10, 2001.

  1. trimmasters

    trimmasters LawnSite Senior Member
    Posts: 262

    Lazer Z HP Blades will not engage

    Any ideas what to look for? You pull the switch and nothing happens. Wiring? Cluch? Thanks for your help.
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Trimmasters,

    There could be any number possibilities preventing the engagement of your PTO. You can begin by making sure the electric clutch is plugged into the connector, the wiring is plugged into the PTO switch, check the fuses and check for any wires that may be damages chafed etc.

    One other option is to take the unit to your dealer. For many, myself included, electrical trouble shooting can be difficult even if you completely understand the process.

    You may also give me a call at 402-223-6358 and I can try to walk you through some things.

    Thank you

    Terry
     
  3. trimmasters

    trimmasters LawnSite Senior Member
    Posts: 262

    Thanks for your help. I traced the problem back to the pto switch. Got a new one and i'm good to go. Thanks again
     

Share This Page