lazer z hp hydro problems

Discussion in 'Lawn Mowing' started by Cutters Lawn Care, Jul 12, 2004.

  1. Cutters Lawn Care

    Cutters Lawn Care LawnSite Senior Member
    Posts: 314

    Was cutting today and all of a sudden I had no forward or reverse on the z hp. Fluid is full. No leaks to be found. I did hear some sort of noise right before this happened. Dealer is closed on Mondays. Gonna take it in first thing in the a.m. Any ideas what's going on???????
     
  2. txlawnking

    txlawnking LawnSite Bronze Member
    Posts: 1,905

    A broken pump drive belt, or your linkages came loose..Probably the belt.
     
  3. Cutters Lawn Care

    Cutters Lawn Care LawnSite Senior Member
    Posts: 314

    that's what i was thinking
     
  4. 65hoss

    65hoss LawnSite Fanatic
    Posts: 6,360

    Did you look under the mower?
     
  5. brucec32

    brucec32 LawnSite Platinum Member
    Posts: 4,403

    check your dump valves, there's a small chance they loosened up and just need to be tightened

    check your belt idler arm, they're hard to reach to grease and after a while stick so that the belt slips.

    and of course, check for a broken belt.
     

Share This Page