1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Leaf loader mounting on gooseneck and leaf box design help

Discussion in 'Landscape Maintenance' started by AdvLandscapeLLC, Jul 23, 2010.

  1. AdvLandscapeLLC

    AdvLandscapeLLC LawnSite Senior Member
    Posts: 567

    Alright everybody time for some creativity help here. I have a 16hp giant vac leaf loader that i would like to mount on my 16ft gooseneck dump trailer. Has anyone done this before and if so where did you decide to mount the loader. I am up in there between mounting to the neck of the trailer or the sides or the rear any ideas or suggestions would be great for the mounting and the box here is a picture of the trailer

    IMG_0061.jpg

    30658_10150192922040472_551745471_12857568_4342881_n.jpg
     
  2. cuttin-to-the-Max

    cuttin-to-the-Max LawnSite Bronze Member
    Posts: 1,329

    I say it would be best on the neck of the trailer but it might be pretty high up.....
    That or I cant tell if it has a swing gate on the back but if so put it there! Good luck!
     

Share This Page