LED replaces 1157 Bulb!

Discussion in 'Trucks and Trailers' started by HighGrass, Jun 25, 2006.

  1. HighGrass

    HighGrass LawnSite Bronze Member
    from Z5 MA
    Posts: 1,237

    I just put these in my trailer today! They replace the normal incandescent 1157 and will take a better pounding.

    [​IMG]
     
  2. PerfiCut L&L

    PerfiCut L&L LawnSite Senior Member
    Posts: 458

    are you sure? Looks to me like it has the same plug in connection as the 1157's, which is a poor design agains the elements.

    Sure the led's will last, problem is, I think they're gonna outlast the connector. Unless you can seal the housing and keep the rain and moisture out.
     
  3. DBL

    DBL LawnSite Silver Member
    Posts: 2,219

    its only a matter of time before everything is led most of the lights on our trucks and equipment is led. thats the ad ons and replacement stuff
     
  4. oldrustycars

    oldrustycars LawnSite Senior Member
    Posts: 301

    198 is an exact replacement for 1157, but will take severe duty. anyone who drops a ramp on a trailer while the lights are on will benefit from a 198.
     
  5. HighGrass

    HighGrass LawnSite Bronze Member
    from Z5 MA
    Posts: 1,237

    Right now, because of the roads around here, regular 1157's just don't last. I use di-electric grease on all the connectors and never have had a problem with even the slightest bit of corrosion, so the housings are fine.
     
  6. HighGrass

    HighGrass LawnSite Bronze Member
    from Z5 MA
    Posts: 1,237

    Been there...done that.:rolleyes:
     
  7. BSDeality

    BSDeality LawnSite Silver Member
    Posts: 2,849

    I converted to LED taillights on my trailer last year and I love them, they get peoples attention much easier than conventional bulbs. I would like to convert my entire trailer to LEDs, and my F350 too because I leave my running lights on all day long while I'm working unless I'm parked at a jobsite for more than an hour or two.
     
  8. TLS

    TLS LawnSite Fanatic
    Posts: 7,937

    Analog flashers have a hard time with LED's. There isn't enough resistance.

    I've had the same bulbs in my trailer since '96 when I installed all Betts housings in it. They are regular bulbs. Just quality housings and snap seal wiring.
     

Share This Page