1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Lesco bench grinder help

Discussion in 'Lawn Mowing' started by zamboni, Dec 24, 2005.

  1. zamboni

    zamboni LawnSite Member
    Posts: 35

    Merry Christmas to all. Recently I purchased a Lesco bench grinder. For some reason it does not sharpen the entire thickness of the sharp portion of the blade. It leaves about 1-2millimeters unsharpened. This is very strange to me. Anybody else have this problem with the Lesco or other brands? Does the Magna Matic do this or does it trim the entire blade? Help is needed Thanks, John/
  2. lawnmaniac883

    lawnmaniac883 LawnSite Silver Member
    Posts: 2,613

    As long as the edge of the blade is sharp, dont worry over it. The angel is a little less steep on the new grinder, after a few sharpenings, the entire thickness of the blade will be sharpened.

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    We have 1, you should have adjustment screws to set it at whatever angle.

Share This Page