Lesco spindle

Discussion in 'Lawn Mowing Equipment' started by gsmith4965, Dec 8, 2013.

  1. gsmith4965

    gsmith4965 LawnSite Member
    Posts: 45

    I need a spindle for my 36" Lesco Hydro. Factory P/N is 707491. this part is impossible to find or cross reference to an aftermarket equivelent. Can anyone help? thnk you
     
  2. DXN1EL

    DXN1EL LawnSite Senior Member
    from TEXAS
    Posts: 452

  3. gsmith4965

    gsmith4965 LawnSite Member
    Posts: 45

    Thanks DXN1EL Unfortunately, my spindle appears to be splined insead of a key slot on the pully side. Cant find any like this.....Length is aprox 4-5/8 thru the bore. Im stumped!
     
  4. DXN1EL

    DXN1EL LawnSite Senior Member
    from TEXAS
    Posts: 452

  5. gsmith4965

    gsmith4965 LawnSite Member
    Posts: 45

  6. gsmith4965

    gsmith4965 LawnSite Member
    Posts: 45

    model is 708686
    36" Commercial plus hydro, 2006 model
     
  7. GreenI.A.

    GreenI.A. LawnSite Silver Member
    Posts: 2,132

    Have you tried a deere dealership?
     
  8. gsmith4965

    gsmith4965 LawnSite Member
    Posts: 45

    john deere part number is B1707491 $325!!!! Really for a $50 spindle?

    OK Now what ? Has anyone ever converted these spindles to scag type ?

    Another reason to NOT to by a Deere....'Nothing costs like a deere'

    Suggustions welcome.
     
  9. DXN1EL

    DXN1EL LawnSite Senior Member
    from TEXAS
    Posts: 452

    I was thinking the same thing, the Scag seems that it will fit?
    If you have a welder just like I do you can make it if for some reason doesn't.
     
  10. pugs

    pugs LawnSite Gold Member
    Posts: 3,018

    Check with a Cub Cadet dealer.

    This might be it but not sure. MTD part 01007491P. But thats going to be around 200 if it is even correct.

    Bottom line is if you want original you are going to pay for it. If you want cheap, you are on your own.
     

Share This Page