Lights for a 260Z ?

Discussion in 'Gravely (Archived)' started by Piedmont Lawn, Sep 3, 2002.

Thread Status:
Not open for further replies.
  1. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Hi Guy's

    This is my first post on this forum. I bought a 260Z last week and have been thinking about adding some lights to it not so much for mowing but finding my way around at night and make the rear of the mower visible. I have foot problems and often used my old mower for trips to the mailbox and short trips to visit my neighbors. The trips are short under three, four hundred yards so it’s not likely you will run across me picking up the dry cleaning or grocery shopping.

    Has anybody here added lights to their Gravely Z, where did you put them do you have pic’s, how many watts can I run with the 25hp Kohler. I like the roll bar that would be an excellent place to mount front and rear lights but the $399.00 price tag is a little much for a light mounting point. Hmmmm speakers and a CD player... No life would be too good
    :D

    Kelly
     
  2. The Gladiator

    The Gladiator Member
    Posts: 70

    Zq8

    There is a headlight kit available from Gravely p/n 792019. The list price is $99.00.

    They mount under the fuel tanks infront of the rear wheels. It should fit the need.

    Regards,
    Dan Kilgas
     
  3. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Hi Dan,

    Thanks for the info, do you know where I can find a pic of the kit or mounted on a mower.


    Kelly
     
  4. The Gladiator

    The Gladiator Member
    Posts: 70

    Zq8 I'm having trouble sending you a picture becuase of the file size and the limits on this site. Can you send me your e-mail address so I can go directly to you.

    Thanks,
    Dan
     
  5. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Hi Dan,

    I have sent you my email addy.

    Thanks!
    Kelly Williams
     
  6. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Hi All,

    For those that are interested The Gladiator sent the pic of the Gravely light mounted, it’s a rectangle light and it rides just below the gas tank. It has a very clean look I’m going to try and resize the photo and put it up on my Bravenet photo page if anybody wants to look at it.

    I went by several auto parts stores, Northern Tool and Tractor Supply looking at lights. They have lights that look very similar to the Gravely light, they are called “tractor lights” go figure. I bought a pair of “Blazer” trapezoid general-purpose utility lights $9.99 each, they come in flood, trapezoid and spot. They have a 35watt 5” sealed beam. I wired one to a cig lighter plug and will test it out tonight. If you want to see the Blazer lights go to >
    http://pub10.bravenet.com/photocenter/view.php?img=18286&usernum=800288925

    See Ya,

    Kelly
     
  7. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Kelly
    Gravely's Are Rectangular!
     
  8. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    John,

    :eek: What wuz I thunkning.......I do have spell checker, now where did I put it........

    Kelly;)
     
  9. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Well gang I tried out the Blazer 5” seal beam lights and they are much better than some of the lights on the regular riding mowers I have seen in the past. They cast a good pattern but the light color is too yellow for my taste but they would do. I picked up a pair of Hella FF75 55 watt driving lights $79.99 for a standard, from what I have read at this forum and other places they are one of the better small halogen lights. I also got a pair of the small blazer halogen lights $17.99, nothing on the package to indicate the wattage, I will try them out tonight. I am using a Schumacher rechargeable batter booster for the power source it is about the same size as the PM 260Z battery so hopefully the results will be close.

    Pic
    http://pub10.bravenet.com/photocenter/view.php?img=18867&usernum=800288925
    :drinkup:
     
  10. Piedmont Lawn

    Piedmont Lawn LawnSite Member
    Posts: 178

    Hi Guys,

    I got the lights on the 260Z today. My Gravely dealer gave me pair of brackets from an Airens mower he had laying around :D I had to drill 2 holes in the mounts for the steering controls to bolt them on. The hardest part was pulling and tying the wire to keep it away from moving parts and rubbing on the frame. I will position them tonight.

    Total cost around $22.50 :D

    Kelly
    :D

    Well I tried to link some pic's, didn't work :( If you want to see look here.

    http://pub10.bravenet.com/photocenter/view.php?img=19460&usernum=800288925

    http://pub10.bravenet.com/photocenter/view.php?img=19461&usernum=800288925

    http://pub10.bravenet.com/photocenter/view.php?img=19462&usernum=800288925

    http://pub10.bravenet.com/photocenter/view.php?img=19463&usernum=800288925

    http://pub10.bravenet.com/photocenter/view.php?img=19464&usernum=800288925

    http://pub10.bravenet.com/photocenter/view.php?img=19465&usernum=800288925
     
Thread Status:
Not open for further replies.

Share This Page