Well for the past 2 days I have been reinstalling a submersible pump in a lake. The lake police told the home owner to remove the pump last fall. Well today I reinstalled the pump in deeper water and in a different place. It was fun having to work on a 6ft ladder in the water. Or hold my breath to tighten the bottom clamp on the pump with a nutdriver. No place to set your tools. The dock had a skirt around the edges, so it was hard to get anything under the dock i.e cordless drill, sawzall. Had to mount the pipe up against the decking to hide the pipe. Also had to mount the pump up against a 4x4 post. The pump is sitting on a cinder block. I will take some 1x6s and mount them on the sides of the 4x4 to hide the pump so when the water level gets low. I used the stainless clamps around the post and pump. I will finish up tomorrow painting the the PVC pipe black. What a great day at the office.