m-60 not cutting

Discussion in 'Lawn Mowing' started by m60 tank, Apr 29, 2011.

  1. m60 tank

    m60 tank LawnSite Member
    Posts: 1

    hey everyone. having a little trouble with my m60 cubcadet zero turn mower.. i have put new blades on and have replaced the belt,and still when i cut the center blade doesnt cut very well the two outside blades cut fine. and center blade is not cuttin.. please help is it a way to adjust belt tension..
     
  2. topsites

    topsites LawnSite Fanatic
    Posts: 21,654

    Have you tried the owner's manual?
     
  3. ProStreetCamaro

    ProStreetCamaro LawnSite Platinum Member
    Posts: 4,121

    Has it always been like this or is this problem new?
     
  4. WJC

    WJC LawnSite Senior Member
    Posts: 364

    Blades not on upside down is it?
     
  5. gibbonsballer10

    gibbonsballer10 LawnSite Senior Member
    Posts: 262

    Problem #1: Its a cub cadet
    Problem # 2: Its a cub cadet
     
  6. TNGrassCutter

    TNGrassCutter LawnSite Bronze Member
    Posts: 1,321

    Problem #3: you guessed it, its a cub cadet. It's not one of those new ones they advertise with a steering wheel is it? Because that would be problem #4.
    Posted via Mobile Device
     
  7. KINGMADE

    KINGMADE LawnSite Member
    Posts: 237

    Problem number 5... you asked a question on a forum with a bunch of a$$holes waiting to reply.
     
  8. ProStreetCamaro

    ProStreetCamaro LawnSite Platinum Member
    Posts: 4,121


    Yup because those Tanks just cut TERRIBLE.

    Thick wet lush spring growth here on heavily fertilized lawn cut with a Tank M48. See how bad those Tanks cut?

    [​IMG]
     
  9. MOHUSTLER

    MOHUSTLER LawnSite Bronze Member
    Posts: 1,376

    HAHAHA that made me laugh out loud.

    make sure your deck is in proper pitch.
     
  10. joshnwright

    joshnwright LawnSite Member
    Posts: 40

    I LOVE both my tanks my 2005 works good but I would put my 2011 against ant thing that cuts grass! But to your problome check the spring that tentions the main belt It is attatched to the arm that is on your left hand pully cove (left hand while sitting on the mower) I have had to replace mine 1 time in 1100 hrs also make shur the belt is routed rite it route weird good luck dont worry about thes guys that like over paying for a red or green paint job haha
     

Share This Page