Magnamatic 9000 users: Extended worktable?

Discussion in 'Magna-Matic' started by 2manymowers, Jul 4, 2011.

  1. 2manymowers

    2manymowers LawnSite Member
    Posts: 116

    Is the extended worktable worth the extra cost? Does is reduce the blade cutting (grooving) the worktable?
  2. Magna-Matic

    Magna-Matic Sponsor
    Posts: 827

    Hello 2manymowers

    I've already responded to your other post regarding the worktable.
    Based on your description of the (area of the table where) screw behind the grinding wheel wearing down more than the rest of the table - leads me to believe that you may not be flat on the table.

    That being assumed - the extended table allows you to keep more of the blade all flat on a larger table surface so that you do not "saw" the table with the mower blade. This is especially helpful with HIGH LIFT BLADES, since they have so little flat underside near the tip of the blade.

    Thank you,
  3. dwost

    dwost LawnSite Bronze Member
    Posts: 1,666

    Highly recommend the extended table. I have minimal grooving on mine. I switched mine before first use and would not go back. Frankly, they should ship the unit with this table as stock.

Share This Page