1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Masterchute on a WB

Discussion in 'Lawn Mowing' started by LAWNGODFATHER, Jul 23, 2003.

  1. This is a mach up, but it will show the same Masterchute for a Lazer 60" will fit a 52" WB......

    It doesn't have any wires hooked up, but it bolts right up on the WB.

    I'll use the Lazer pics in different positions.

    chute on wb 2.jpg
  2. The wires would of course run to battery, and a switch on your console.

    chute on wb.jpg
  3. Looks good, don't it? 45 seconds to bolt it on if that.

    chute on wb 1.jpg
  4. Half way down...........

    master chute half way up.jpg
  5. 3/5th way down.

    This might be one of the ways many will use it, if not closed all the way.

    master chute part down.jpg
  6. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    looks good to me, are you going to use just a momentary switch on the console??
  7. Even further close but not all the way.....

    Of course it does close all the way too..........

    Use your imagination this is the last pic..

    master chute most way down.jpg
  8. That's what it would of come with if I got it for a WB. But this is for a Lazer using a foot switch I just waited to show pics.

    On www.masterchute.com it shows pic of switch for a WB.

    This is the coolest thing since sliced bread.......

    Pics from master Chutes web site

  9. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    Ok, now i see:)

Share This Page