1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Meyer E60 or E60H? Difference

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by RB, Dec 31, 2000.

  1. RB

    RB LawnSite Senior Member
    Posts: 306

    What's the difference between a Meyer E60 and E60H?

    Is one pump better than the other?

    Is there a way to turn an E60 to E60H?

  2. plow4u

    plow4u LawnSite Member
    Posts: 4

    I have both an E-60 and an E60H from my understanding they are both the same except the the E-60H has a longer piston stroke to raise the heavy municipial type plows higher. You can change the tank and piston along with the studs and etc. either way. At least this is what I was told by Central Parts Warehouse. Call them they are great to deal with and very helpful.
  3. RB

    RB LawnSite Senior Member
    Posts: 306


  4. Lou

    Lou LawnSite Member
    Posts: 39

    The E-60 is a light duty pump. There are several differences
    between the two pumps. The ram on the E-60H has a wider diameter so they do not interchange. You can't go wrong with an E-60H....it is made for heavy duty use, and they are usually more dependable. There is a prior post that discusses these pumps......seek and you may find.....

Share This Page