Meyers plow creeping?

Discussion in '<a href=http://www.plowsite.com target=_blank ?>Sn' started by CrewCut, Jan 26, 2001.

  1. CrewCut

    CrewCut LawnSite Member
    Posts: 14

    This morning I go out to put the plow on the e-60 with an 8ft plow and the darn thing won't go down, so I found that the o-ring on the A-cartridge was split so I replaced it with a new and that night it busted again. I then replaced that o-ring will a cat o-ring and that seems to hold it, but down when I drive down the street the plow is creeping down slowly, but when I stop and put it down and shut it off then start it back up it stops the creeping, any ideas?
     
  2. finnegan

    finnegan LawnSite Member
    Posts: 109

    check that coil and see if there is any stray voltage going to it but if you blew 2 o rings sounds really serious to me i'd ask chuck real nice and maybe he'd help you....
     

Share This Page