Mini Z - right side has no power?

Discussion in 'Mechanic and Repair' started by pajohn, Jul 29, 2006.

  1. pajohn

    pajohn LawnSite Member
    from PA
    Posts: 15

    Just happened all of a sudden. The right side will barely move, left side is fine. I checked all the linkage and it looks fine. Bad hydrolic motor or whatever it's called on that side? Anything else to check?
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    check the hydro. fluid, Belt tension and make sure the pump bypass valve is closed.
     
  3. MowerMedic77

    MowerMedic77 LawnSite Bronze Member
    Posts: 1,164

    Also check the bracket that the linkage is attached to at the pump, some manufactures use a set screw to hold that bracket onto the pumps input shaft and they back off and creat play right at the pump.
    Fixed many a weak drive system with only an allen wrench:)
     
  4. pajohn

    pajohn LawnSite Member
    from PA
    Posts: 15

    I got it. There was a nut on the pump that was loose (bypass valve?) I just snugged it up and all is fine. Thanks guys.
     

Share This Page