MiniZ 19/42

Discussion in 'Hustler Turf Equip (Archived)' started by Scott S., Aug 29, 2006.

  1. Scott S.

    Scott S. LawnSite Member
    Posts: 14

    I've got a Mini Z 19/42 that I've had for about 3 months now and to say the least I'm not impressed with the cutting capabilities. It keeps leaving uncut pieces of grass all over the place. I talked to the dealer and they suggested a set of gator blades and guess what...no better. So they talked me into a mulcher kit and wavy blades, and still no better. So now I've got $160 in equipment I really didn't need and it still cuts poorly. HELP!!!!!
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Scott,
    Please e-mail me your details.

    Pj
     
  3. Scott S.

    Scott S. LawnSite Member
    Posts: 14

    What details are you looking for PJ?
     
  4. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Your information, model and serial # and dealer, I am assuming the dealer is Reynolds?
    I want to get our regional service manager involved.

    Pj
     
  5. Scott S.

    Scott S. LawnSite Member
    Posts: 14

    Well I have Reynolds coming out tomorrow to look at it and give me their opinion. If I'm still having problems, I will let you know.
     
  6. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Ok.
    Let me know how you make out.
     
  7. Scott S.

    Scott S. LawnSite Member
    Posts: 14

    Unfortunately, my info on the way!
     
  8. FIRE

    FIRE LawnSite Member
    Posts: 90

    I Have A Mini Z 42 Only A Couple Of Weeks Old Noticed The Same Thing.
    Thanks Fire
     
  9. edrabuc

    edrabuc LawnSite Member
    Posts: 6

    I have a Mini Z 36 and have the same problem. I have move fushion blades, gator blades, and wavy baldes all with same result. I due a lot of double cutting which I should not have to. Any suggestions would be real helpful.
     
  10. edrabuc

    edrabuc LawnSite Member
    Posts: 6

    What was the resolution for the problem? I have a Mini-36 with the exact same issue
     

Share This Page